Stainless Steel Coil and sheet quality

Inquiries : 153 - 2015/10/21 14:55:20

1.Versatile quality

Jiangsusteel group Corporation stainless steel coil and sheet is ideal for a wide variety of applications and is produced using the most advanced technologies and to thestrictest quality requirements. It is available in a range of corrosion andheat resistant grades to offer a high-strength, corrosion resistant materialthat is lightweight, highly workable, and 100% recyclable.

Jiangsusteel group Corporation is one of the few Stainless Steel Cold Rolled Sheet producers that can provide coils in width up to two meters(72”). Our expertise in surface finishes enables us to offer patterned materialin the widest available thickness range, from 0.3 up to 3.5 mm and inwidths of more then 1500 mm.

Our state-of-the-art melt shops ensure superior control of product composition, structure, and inclusion pattern to produce very clean steel. Computerized process control of our rolling mills, heat treatment facilities, and finishing lines ensure consistency and superiorcontrol of the targeted properties to ensure you get exactly the productyou need.

2.Typical applications of stainless steel coil and sheet

· Process industry

· Consumer goods

· Marine environments

· High-end construction

3.Cold rolled coil

Surface finish	Thickness mm	Width mm
Mill finish	0,80 - 4,50	35 - 1610
2A	0,50 - 1,00	35 - 1280
2BB Bright-pickled	0,20 - 4,00	30 - 1530
2F Cold rolled, heat treated, skin passed	0,33 - 3,58	12 - 1524
2S Surface coated	0,40 - 3,00	30 - 1500
Brushed or dull polished	0,20 - 3,00	30 - 1530
Cold rolled, bright annealed	0,05 - 3,50	3 - 1530
Cold rolled, heat treated	0,40 - 12,00	30 - 2000
Cold rolled, heat treated, mech. desc. pickled	0,30 - 7,92	12 - 2070
Cold rolled, heat treated, pickled	0,20 - 6,50	30 - 1600
Cold rolled, heat treated, pickled, skin passed	0,20 - 6,35	12 - 2032
Ground	0,20 - 6,00	12 - 1580
Hot rolled, heat treated, mech. desc.	3,00 - 4,50	50 - 1550
Patterned	0,30 - 3,50	30 - 1530
Profile rolled	0,40 - 1,50	36 - 1275
Satin finish	0,50 - 4,00	12 - 1580
Work hardened	0,05 - 6,00	3 - 1530

4.Cold rolled sheet

Surface finish	Thickness mm	Width mm	Length mm
Mill finish	0,80 - 4,50	35 - 1610	0 - 99999
2A	0,50 - 1,00	35 - 1280	0 - 14000
2BB Bright-pickled	0,20 - 4,00	35 - 1530	0 - 14000
2F Cold rolled, heat treated, skin passed	0,33 - 3,58	18 - 1524	400 - 5000
Brushed or dull polished	0,20 - 3,50	35 - 1530	0 - 14000
Cold rolled, bright annealed	0,20 - 4,00	18 - 1530	0 - 12000
Cold rolled, heat treated	0,40 - 5,00	400 - 1500	0 - 12000
Cold rolled, heat treated, mech. desc. pickled	0,33 - 6,35	18 - 2070	0 - 99999
Cold rolled, heat treated, pickled	0,25 - 6,50	35 - 1600	0 - 14000
Cold rolled, heat treated, pickled, skin passed	0,25 - 8,00	18 - 2032	0 - 14000
Ground	0,20 - 6,35	18 - 2070	0 - 14000
Hot rolled, heat treated, mech. desc.	3,00 - 4,50	450 - 1550	1000 - 9015
Patterned	0,25 - 3,50	350 - 1530	0 - 12000
Profile rolled	0,40 - 1,50	400 - 1250	400 - 8000
Satin finish	0,50 - 4,00	18 - 1550	0 - 99999
Work hardened	0,25 - 6,00	18 - 1530	0 - 14000